Energy Safe Victoria
Let's help you see the right content.

Please make a selection

We are using cookies.

Energy Safe Victoria uses cookies to help give you the best possible user experience. By continuing to browse this site you give consent for cookies to be used.


Know the drill before you grill


Last summer, there were too many dangerous barbecue fires involving LP Gas cylinders in Victoria. Some of those barbecue fires turned into house fires, resulting in serious burns and the loss and damage of family homes.

So, to stay safe, know the drill before you grill.

Get into the habit of doing a soapy water check. Squirt your gas connection with soapy water to make sure there are no leaks. If no bubbles appear, you’re safe to use.

Get a free soapy water bottle

Order a free soapy water bottle from our merchandise page, and we’ll post it to you to keep with your barbecue kit.

The drill

Follow these simple steps every time you use your barbecue:

  1. Inspect the hose for signs of perishing or cracking – if the hose is cracked or perished, don’t use the BBQ until the hose has been replaced.
  2. Use a squeezy bottle filled with soapy water to check the connection for gas leaks (use dishwashing liquid and water). Squirt the connection with the suds from the soapy water solution.
    – Bubbles will form if gas is escaping.
    – Leak-test the connection to the cylinder every time you connect it or change cylinders.
    – Serious leaks are common and can be very dangerous.
    – Check and leak test the connection every time you barbecue.
  3. If no bubbles appear, you’re safe to cook.

What to do if you see bubbles:

  • Switch off the gas immediately
  • Re-check the hose to make sure it hasn’t perished
  • Re-check connections to make sure they are tight – get into the habit of doing this regularly
  • Check that the O ring on the connection hasn’t perished
  • Check the gas cylinder for damage
    – Note: you can’t refill an LP Gas cylinder if it hasn’t been tested for over 10 years, or if the cylinder has been damaged. Always exchange LP Gas cylinders at a reputable supplier.
  • Re-test with soapy water, and if bubbles still form turn off the gas. Your LP Gas cylinder or hose may need replacing.

Get into the habit of doing a soapy water check. Know the drill before your grill.


New safer valves on LPG cylinders

From 1 April 2021 LPG cylinders with new valves are being phased in.

When you next exchange your BBQ or outdoor gas appliance LP Gas cylinder, you may receive a cylinder with the new valve.

You won’t need to replace your BBQ or outdoor gas appliance as the new valve, known as the LCC27, will safely and easily connect to the hose on your existing BBQ.

The LCC27 valve is being introduced to improve safety and reduce the risk of BBQ fires and accidental gas leakage from LPG cylinders.

Cylinders with the current valves – Type 21 (POL) – may continue to be used. These valves will be phased out over a ten-year period as each LPG cylinder is due for a retest or ten-year change over.

From 1 October 2021, BBQs and gas appliances with new hose fittings, designed especially for the new valve, will also be phased in. A timeline of these changes is shown below.

More information


Storing or transporting LP Gas cylinders

Remember to close the valves on LP Gas cylinders whenever they are not in use, particularly when they are being transported.

When transporting an LP Gas cylinder, ensure that it is securely restrained in your vehicle – use a sturdy container, such as a milk crate, to keep the cylinder upright and steady. Make sure you have good ventilation in your vehicle.

Worksafe Victoria has some useful information about transporting LP Gas cylinders.


More information